全自动搅拌车的搅拌罐无疑是主要的组成部分,它关系到全自动搅拌车、功能及车主的运营的效益等多方面,搅拌车的搅拌容积大小更是不可忽视的因素,选用何种容积比较好呢?下面先来了解下“容积”的信息。
Undoubtedly, the mixing tank of the fully automatic mixer is the main component, which is related to the price, function, operation benefit of the owner and other aspects of the fully automatic mixer. The mixing volume of the mixer is a factor that cannot be ignored. What volume is better to choose? Now let's learn about the "volume".
搅拌车几何容积:搅拌桶内实际的几何容积,是指搅拌罐设计时,用数学方法计算出来的几何容积。
Geometric volume of mixer truck: the actual geometric volume in the mixing drum refers to the geometric volume calculated by mathematical method during the design of the mixing tank.
搅拌容积:搅拌车能够运输的预拌混凝土量(以捣实后的体积计)。可以看成搅拌车到达工程现场所能够卸下的混凝土方量预拌混凝土容量按2400kg/m3计算。
Mixing volume: the volume of ready mixed concrete that can be transported by the mixer truck (measured by the volume after tamping). It can be seen that the volume of ready mixed concrete that can be unloaded by the mixer truck when it arrives at the project site is calculated as 2400kg/m3.
搅拌车容积:搅拌车置于水平位置,搅拌桶能容纳大的未经搅拌的混凝土物料(包括水),并能搅拌出运混凝土的量(以捣实后的体积计)。
Volume of mixer truck: the mixer truck is placed in a horizontal position, and the mixing bucket can hold large unmixed concrete materials (including water), and can mix the amount of concrete transported to the concrete (measured by the volume after tamping).
三者的关系应该是:搅拌车几何容积>搅拌容积>搅拌动容积,用户经常所说的容积应该是指搅动容积,所以在现购搅拌车时,要注意区分问清车辆的搅拌容积。
The relationship between the three should be: the geometric volume of the mixer truck>the mixing volume>the stirring dynamic volume. The volume often mentioned by users should refer to the stirring volume. Therefore, when purchasing the mixer truck, pay attention to distinguish the mixing volume of the vehicle.
有效容积的算法跟罐体的倾角有关。一般倾角在12度、13度,填充率在63%左右。有效容积=几何容积X填充率。所以算有效容积得先看搅拌车的倾角。但是生产出来的十方搅拌车,生产的时候容积都有余量的,说的是10方,实际容积在10.5左右,但是实际装载的时候却要留有余量一般装载9方多一点。
The algorithm of effective volume is related to the inclination of tank body. Generally, the dip angle is 12 ° and 13 °, and the filling rate is about 63%. Effective volume=geometric volume X filling rate. Therefore, to calculate the effective volume, the angle of inclination of the mixer truck must be considered first. However, the volume of the ten square agitator truck produced has a margin during production, which is 10 square meters, and the actual volume is about 10.5. However, the actual loading requires a margin of more than 9 square meters.
That's all for the introduction of the relevant volume of the mixing tank of the automatic mixer truck. I hope it can help you effectively. Of course, if you have any questions or purchase needs, you can come to our website at any time http://www.zkzsljbc.com Consult!