小型搅拌车容易发生事故，在保障工程进度完成的情况下能保证人身的，这是为自己负责也是为他人负责。那么防止小型搅拌车出车祸的正确做法是什么呢？

　　Small mixing truck is prone to safety accidents, in the case of ensuring the completion of the project schedule can ensure personal safety, which is responsible for their own responsibility is also responsible for others. So what's the right thing to do to prevent an accident with a small mixer?

　　小型搅拌车要做到行驶，不但需要车辆制造厂家制造出的车辆，并对时速等做详细说明，不能虚假宣传，从源头上狠抓小型搅拌车的行车。

　　In order to achieve safe driving of small mixing vehicles, not only the vehicle manufacturers need to produce safe vehicles, but also make detailed descriptions of the maximum speed, so as not to falsely advertise, and pay close attention to the driving safety of small mixing vehicles from the source.

　　由于目前混凝土企业挂靠车辆较多，因此，也需要加强对这些车辆的管理。车辆须依法检测合格，从业人员须经过培训，除了由交通部门颁发的合适级别的驾驶证外，同时还须持从业许可证上岗才可以。

　　Because the concrete enterprise is attached to the vehicle more at present, therefore, also need to strengthen the management of these vehicles. Vehicles must be tested qualified according to law, employees must undergo safety training, in addition to the appropriate level of driving license issued by the traffic department, but also must hold a license to work.

　　提高意识，加强对搅拌车驾驶技巧的学习。只有每一个司机时刻保持高度的意识，才能避免事故发生；企业有规模的组织对搅拌车驾驶员的培训，提高驾驶员的驾驶技能，新手司机多向老司机学习，注重针对转弯、下坡方面的驾驶实践学习。

　　Improve safety awareness, strengthen the study of stirring vehicle driving skills. Only every driver always maintain a high level of safety awareness, to avoid accidents; The company organizes large-scale training for drivers of mixing vehicles to improve their driving skills. New drivers learn from old drivers and pay attention to the driving practice of turning and downhill.

　　小型搅拌车“块头”大、车身高，在车辆转弯时，往往造成后轮处盲点。为有效避免涉及小型搅拌车夜间及追尾事故的发生，运输车的车身要粘贴反光标识，车身侧面及后下部要安装防护装置。对不符合粘贴车身反光标识、安装侧面及后下部防护装置要求的车输，要严格查处。

　　Small agitator “bulk” large, high body, when the vehicle turns, often cause a blind spot at the rear wheel. In order to effectively avoid night and rear-end accidents involving small agitator vehicles, reflective labels should be pasted on the vehicle body, and protective devices should be installed on the side and rear bottom of the vehicle body. Those vehicles that do not conform to the requirements of sticking reflective marks on the body and installing side and rear lower protective devices shall be investigated and dealt with strictly.

　　防止小型搅拌车出车祸的正确做法有什么？以上几点便是，还有很多方法值得大家来网站www.zkzsljbc.com进行详细的了解，多多学习保证，顺利完成项目的施工！

　　What's the right way to prevent a small mixer from crashing? The above points are, there are many methods worth everyone to the website www.zkzsljbc.com for detailed understanding, learn more to ensure safety, smooth completion of the project construction!