每位车主在每天出车前对自动上料搅拌车进行一些必备检查是必须的，这样能对车辆出现的问题早发现、早处理，不仅能节省维修费用，也会降低营运成本。现为车主朋友介绍如下：

It is necessary for each car owner to conduct some necessary inspections of the automatic feeding mixer truck before leaving every day. This can detect and handle problems that occur in the vehicle early, not only saving maintenance costs but also reducing operating costs. I would like to introduce myself to the car owner as follows:

1、仔细检查自动上料搅拌车各部件是否正常

1. Carefully check whether all components of the automatic feeding mixer truck are normal

做好措施，防止装料的搅拌车坏在路上。混凝土需要不停的搅动以防止凝固，如果出现故障导致搅拌罐停转，很容易出现闷罐。一般停罐不能超过2个小时，C40往上级别的混凝土基本就不能停。启动自动上料搅拌车前，必须先检查机油、润滑油和冷却水等物料是否充足，及时进行添加。

Take safety measures to prevent the loading mixer truck from damaging on the road. Concrete needs to be stirred continuously to prevent solidification. If a malfunction causes the mixing tank to stop rotating, it is easy to cause tank blockage. Generally, the tank cannot be stopped for more than 2 hours, and concrete with a C40 level or higher cannot be stopped. Before starting the automatic feeding mixer truck, it is necessary to check whether the materials such as engine oil, lubricating oil, and cooling water are sufficient and add them in a timely manner.

车子启动后，低速旋转罐体，绕车一周检测胎压，防止有漏气车胎，用工具拿掉卡在轮胎中石子等杂物。由于搅拌车工作环境恶劣，车轮每天都在快速磨损，因此每天对车辆轮胎的检查是非常必要的。

After the car starts, rotate the tank at low speed and test the tire pressure around the car to prevent any air leaks. Use tools to remove debris such as stones stuck in the tires. Due to the harsh working environment of the mixer truck, the wheels wear rapidly every day, so it is necessary to inspect the vehicle's tires every day.

其次检验灯光是否正常，务必保证照着轮胎边缘，防止被工地堆放的钢筋杂物割伤。清理干净后视镜和窗户玻璃，司机保持清晰开阔视野，以应对工地的复杂工况场景。

Secondly, check whether the lighting is normal, and make sure to illuminate the edge of the tire to prevent it from being cut by the steel bars and debris piled up on the construction site. Clean the rearview mirror and window glass, and the driver maintains a clear and open view to cope with the complex working conditions of the construction site.

2、准备足够的水和减水剂

2. Prepare sufficient water and water reducing agent

水可以应对混凝土物料干燥无法卸料的情况，减水剂也是同理，防止闷罐。

Water can cope with situations where concrete materials are dry and cannot be unloaded, and the same applies to water reducing agents to prevent tank tightness.

3、启动搅拌车时确保搅拌罐处于静止状态

3. Ensure that the mixing tank is stationary when starting the mixer truck

发动机启动时罐子如果处于高速旋转状态，瞬间的力会非常大，容易使减速机磨损，降低使用寿命。

When the engine starts, if the jar is in a high-speed rotating state, the instantaneous force will be very large, which is easy to cause wear on the gearbox and reduce its service life.

4、车碟的检查

4. Inspection of vehicle discs

自动上料搅拌车用了一段时间后，刹车碟上会出现明显的凹槽。说起来这个原因可能是自动上料搅拌车行驶在砂石路面上时，一些细小的砂石卡在刹车碟与挡泥板之间，不断磨擦刹车碟的表面，所以出现凹槽。

After using the automatic feeding mixer truck for a period of time, obvious grooves will appear on the brake disc. The reason for this may be that when the automatic loading mixer truck is driving on a gravel road, some small sand and stones get stuck between the brake disc and the mudguard, constantly rubbing against the surface of the brake disc, resulting in grooves.

而发生这种情况时，自动上料搅拌车在行走时可能会发出“当啷、当啷”的声音，在有些情况下刹时还会听到尖叫声。而针对这种情况，我们可以透过自动上料搅拌车轮胎铝合金钢圈目测刹车碟表面，刹车碟表面如果光滑，那就表明是正常的。

When this situation occurs, the automatic feeding mixer truck may make a "clanking, clanking" sound while walking, and in some cases, a scream may be heard when braking. In response to this situation, we can visually inspect the surface of the brake disc through the aluminum alloy steel rims of the automatic loading mixer truck tires. If the surface of the brake disc is smooth, it indicates that it is normal.

希望广大车主每天行车前能按以上几点去做，我相信会对你爱车的行驶起到很大的帮助。更多相关内容就来我们网站http://www.zkzsljbc.com咨询吧！

I hope that the majority of car owners can follow the above points before driving every day. I believe it will be of great help to the safe driving of your beloved car. For more related content, come to our website http://www.zkzsljbc.com Consult!