大家知道
自动上料搅拌车的驱动装置么?它的作用是驱动混凝土贮罐转动,如果驱动装置出现故障,那整个混凝土贮罐将不能转动,这会导致车内混凝土报废,严重的甚导致整罐混凝土凝结在罐内,造成车报废。所以我们应该做好它的维护工作。
Do you know the driving device of the automatic feeding mixer? Its function is to drive the concrete storage tank to rotate. If the drive device fails, the entire concrete storage tank will not rotate, which will lead to the scrapping of the concrete in the vehicle, or even the whole tank of concrete will be condensed in the tank, resulting in the scrapping of the vehicle. So we should do a good job in its maintenance.
1、保证液压油清洁。自动上料搅拌车工作环境恶劣,一定要防止污水泥沙进入液压系统。液压油要按使用手册要求定期更换。一旦检查时发现液压油中混入水或泥沙,就要立即停机清洗液压系统、更换液压油。
1. Ensure that the hydraulic oil is clean. The working environment of the automatic loading mixer truck is harsh, so it is necessary to prevent dirty cement sand from entering the hydraulic system. The hydraulic oil shall be replaced regularly according to the requirements of the user manual. Once the hydraulic oil is found to be mixed with water or sediment during the inspection, immediately stop the machine to clean the hydraulic system and replace the hydraulic oil.
2、万向转动部分是故障多发部位,应按时加注润滑脂,并经常检查磨损情况,及时修理更换。车队应有备用的万向轴总成,以保证一旦发生故障能在几十分钟内恢复工作。
2. The universal rotating part is the part with frequent faults. It should be filled with lubricating grease on time, and the wear should be checked frequently, and repaired and replaced in time. The team should have a spare cardan shaft assembly to ensure that it can resume work in dozens of minutes in case of failure.
3、保证液压油冷却装置有效。要定时清理液压油散热器,避免散热器被水泥堵塞,检查散热器电动风扇运转是否正常,防止液压油温度超标。液压部分只要保证液压油清洁,一般故障不多;但生产厂家不同,使用寿命则不一样。
3. Ensure that the hydraulic oil cooling device is effective. The hydraulic oil radiator shall be cleaned regularly to prevent the radiator from being blocked by cement. Check whether the electric fan of the radiator operates normally to prevent the hydraulic oil temperature from exceeding the standard. As long as the hydraulic oil of the hydraulic part is clean, there are few general faults; However, different manufacturers have different service life.
The above is the maintenance method of the driving device of the automatic feeding mixer. I hope you can maintain it regularly, improve the working efficiency and extend its service life. Come to our website for more usage matters http://www.zkzsljbc.com Consult!