一、启动前应对机械系统各部位认真进行检查，确认良好后方可启动。
1、 Before starting, all parts of the mechanical system should be carefully checked, and the machine can be started only after it is confirmed to be in good condition.
二、启动前，应将搅拌操纵杆放在“空档”位置。
2、 Before starting, put the mixing control lever in the "neutral" position.
三、启动后，应将搅拌操纵杆放在“卸料”位置，放去筒内积水。
3、 After starting, the mixing control rod should be placed in the "discharge" position to remove the water in the cylinder.
四、装料时，搅拌操作杆应放在“装料”位置。
4、 When loading, the mixing operating rod should be placed in the "loading" position.
五、运输前，卸料槽必须固定在“行驶”位置，防止摆动。
5、 Before transportation, the discharge chute must be fixed in the "driving" position to prevent swing.

六、操作操纵杆时，应在“空档”位置稍作停留后方可动下一个位置。
6、 When operating the control lever, stop at the "neutral" position for a while before moving to the next position.
七、搞好文明施工，桶内多余材料不准随便乱倒。卸料后必须对搅拌筒、料槽、托辊等部位进行清洗。
7、 Do a good job in civilized construction, and do not dump the surplus materials in the barrel. After discharging, the mixing drum, material trough, idler and other parts must be cleaned.
八、人进入筒内砼结块时，应将车辆熄火，拔下电门钥匙，筒外设人监护。
8、 When people enter the cylinder to remove the concrete lumps, they should turn off the vehicle, pull out the switch key, and set people outside the cylinder to monitor.
搅拌车是一种特殊车辆，并不是所有会开车的司机都会开搅拌车，如果操作不当会引起翻车、液压泵、马达、减速机过快磨损甚出现严重后果。
Mixer is a kind of special vehicle, not all drivers who can drive will drive mixer, if the operation is improper, it will cause rollover, hydraulic pump, motor, reducer too fast wear and even serious consequences.
购买产品重要的是质量，选择商家选择是诚信，全自动搅拌车真诚的为广大客户提供优良的服务，欢迎大家在网站：http://www.zkzsljbc.com下方留言咨询.
The most important thing to buy products is quality. Choosing merchants is honesty. Automatic mixer sincerely provides excellent service for customers. Welcome to visit our website: http://www.zkzsljbc.com Below message consultation