对于自动上料搅拌车干燥罐，开搅拌车的人都不陌生，它是用来过滤气路系统内压缩空气中水蒸气的，防止储气筒和各类泵阀遭到腐蚀，但是我发现很多用户都不太在意这点，因此，搅拌车燥罐能否正常工作，直接影响到刹车的性能。

For the drying tank of the automatic feeding mixer truck, it is not unfamiliar to those who drive the mixer truck. It is used to filter the water vapor in the compressed air in the air circuit system, prevent corrosion of the air storage cylinder and various pump valves. However, I have found that many users are not very concerned about this. Therefore, whether the drying tank of the mixer truck can work properly directly affects the performance of the brake.

自动上料搅拌车替换干燥罐的操作并不繁琐，利用气罐底部的放气阀门，来检查气罐底部是否湿润，或许有水。

The operation of replacing the drying tank with an automatic feeding mixer truck is not complicated. Use the vent valve at the bottom of the gas tank to check if the bottom of the gas tank is wet or if there is water.

假如干燥罐失效，打开阀门之后会有水流出，应该当即替换新的干燥罐。好多人都是只需不出问题，几年可能都不会换一次。并且不同企业的干燥罐运用寿命不一样，并且车辆行驶的气候环境也有差异，替换的周期就很难一致。

If the drying tank fails and water flows out after opening the valve, a new drying tank should be replaced immediately. Many people just don't need to have problems and may not change once in a few years. Moreover, the service life of different brands of drying tanks varies, and the climate environment in which vehicles are driven also varies, making it difficult to maintain a consistent replacement cycle.

假如搅拌车司机们确实不知道何时该替换，能够通过检查储气筒是否有积水的方法来判断。

If the mixer truck drivers really don't know when to replace it, they can determine by checking if there is water accumulation in the air storage tank.

可是在这里也要提示司机朋友们，由于搅拌车干燥罐连接着气路，罐体内部与外界有必定的压力差，压缩空气未排空时冒然拆开，压缩空气瞬间释放，易对拆开人员形成损伤。

But here, it is also important to remind drivers that due to the connection of the drying tank of the mixing truck to the air circuit, there is a certain pressure difference between the inside of the tank and the outside. If the compressed air is not emptied, it can be opened recklessly, and the compressed air is instantly released, which can easily cause damage to the dismantling personnel.

1、我们可以从气罐下手，利用气罐底部的放气阀门，来查看气罐底部是否潮湿，或者有水。因为阀门正好位于气罐底部。同时水的比重较大，如果干燥器失效，那么气路中的湿气因为重力自然会攒到气罐底部，也就是阀门上方。

1. We can start from the gas tank and use the vent valve at the bottom of the gas tank to check if the bottom of the gas tank is damp or there is water. Because the valve is located exactly at the bottom of the gas tank. At the same time, the specific gravity of water is relatively high. If the dryer fails, the moisture in the gas path will naturally accumulate at the bottom of the gas tank, which is above the valve, due to gravity.

2、还有一种方法就是，通过释放各个制动分泵的卸压阀来检查车辆气路中是否含水。尤其是在冬天，气温低，一定要注意检查管路中是否有水，防止制动失效，干燥罐渗漏，劣质的干燥罐是比较容易渗漏的，而且如果是在气候潮湿的南方，干燥罐的使用寿命也会缩短。相反北方由于气候比较干燥，北方的搅拌车的干燥罐使用寿命就比较长。

2. Another method is to check for water in the vehicle's air circuit by releasing the pressure relief valves of each brake cylinder. Especially in winter, when the temperature is low, it is important to check for water in the pipeline to prevent brake failure and leakage from the drying tank. Poor quality drying tanks are more prone to leakage, and if located in the humid southern climate, the service life of the drying tank will also be shortened. On the contrary, due to the relatively dry climate in the north, the drying tanks of mixing trucks in the north have a longer service life.

判断自动上料搅拌车干燥罐是否需要更换的相关内容就讲解到这里了，您对此有怎样的疑惑或者需求，就来我们网站http://www.zkzsljbc.com咨询！

That's all for determining whether the drying tank of the automatic feeding mixer needs to be replaced. If you have any doubts or needs about this, please come to our website http://www.zkzsljbc.com consulting service