有些自上料搅拌车车主遇到问题就进场维修也免不了当了冤大头。今天，小编就整理了一份超实用的搅拌车常见故障检查清单，总有一种能够派上用场。

Some of the owners of self-feeding mixer trucks who come into the site for maintenance when encountering problems will inevitably be the enemy. Today, Xiao Bian has compiled a super practical list of common failures of mixing trucks. There is always one that can be used.

1、散热器不转或转不停

1. The radiator does not turn or does not stop

检查散热器保险是否损坏；如果是，则需更换保险丝；

Check whether the radiator fuse is damaged; If yes, replace the fuse;

检查散热器温控感应塞是否损坏；如果是，则需更换温控感应塞；

Check whether the radiator temperature control sensor plug is damaged; If yes, replace the temperature control sensor plug;

检查散热器风扇电机是否损坏；如果是，则需更换电机；

Check whether the radiator fan motor is damaged; If yes, replace the motor;

检查线路是否断路或虚接，如果是，则需检查更换线路。

Check the circuit for open circuit or virtual connection. If yes, check and replace the circuit.

2、罐体转动无力

2. Can body rotation is weak

检查液压油状态，是否油液太脏；

Check the hydraulic oil status to see if the oil is too dirty;

油门拉线太松；

The accelerator cable is too loose;

检查液压油油量，油位低的话，则需补加液压油规定油位；

Check the hydraulic oil level. If the oil level is low, add hydraulic oil to the specified level;

检查液压泵压力是否过低。

Check whether the hydraulic pump pressure is too low.

3、拖轮异响

3. Abnormal noise of tugboat

检查拖轮的保养情况，检查拖轮及轨道面是否有杂物；

Check the maintenance of the tugboat and check whether there are sundries on the tugboat and track surface;

检查拖轮与轨道间是否存在间隙，可调整拖轮与轨道面相关角度；

Check whether there is a gap between the tugboat and the rail, and adjust the relevant angle between the tugboat and the rail surface;

查内部轴承是否损坏；

Check whether the internal bearing is damaged;

缺黄油。

Lack of butter.

4、搅拌筒不转

4. Mixing drum does not rotate

检查液压泵受控阀销是否断裂；

Check whether the safety pin of the controlled valve of the hydraulic pump is broken;

手控阀连接拉杆的球头螺栓松动或丢失；

The ball stud of the connecting rod of the manual control valve is loose or missing;

检查液压油量是否严重不足；

Check whether the hydraulic oil is seriously insufficient;

滤芯堵塞，吸油不畅；

The filter element is blocked and the oil absorption is not smooth;

减速机损坏；

The reducer is damaged;

液压泵损坏；

The hydraulic pump is damaged;

液压马达损坏。

The hydraulic motor is damaged.

5、后操纵手柄重

5. Rear joystick weight

拉杆支架缺黄油；

The pull rod bracket is lack of grease;

连接球头有无松动。

Check whether the ball joint is loose.

6、室内控制器手柄操作重

6. Indoor controller handle operation is heavy

检查室内控制器拉线是否卡死，角度是否过大；

Check whether the cable of indoor controller is stuck and whether the angle is too large;

检查拉线包皮有无磨损；

Check whether the cable sheath is worn;

检查限位螺母是否松动。

Check whether the limit nut is loose.

实用的搅拌车常见故障检查要点就从6个方面来讲解了一番，您有什么问题就来我们网站http://www.zkzsljbc.com咨询吧！

The inspection points of common failures of practical mixer trucks are explained in six aspects. If you have any questions, please come to our website http://www.zkzsljbc.com Ask!