为了保证行驶,除了遵守交通法规文明驾驶外,还要了解对
自上料搅拌车进行正确操作和保养,才能预防各类事故的发生。比如下面要讲解的关于自上料搅拌车装料的几个事项。
In order to ensure driving safety, in addition to complying with the traffic laws and regulations and driving in a civilized manner, it is also necessary to understand the correct operation and maintenance of the self loading mixer, so as to prevent various safety accidents. For example, the following items will be explained about the charging from the charging mixer.
1、自上料搅拌车装料前,应检查并罐体及出料管道内的积灰和结渣等物;各管道、阀门应启闭灵活,不得有堵塞、漏气等现象;各连接部件应牢固可靠,方可进行装料。
1. Before loading from the charging mixer truck, check and remove the ash and slag in the tank and discharge pipe; All pipes and valves shall be opened and closed flexibly without blockage, air leakage, etc; All connecting parts shall be firm and reliable before loading.
2、在打开装料口前,应先打开排气阀,排除罐内残余气压。
2. Before opening the charging port, the vent valve shall be opened to discharge the residual air pressure in the tank.
3、装料时,应打开料罐内料位器开关,待料位器发出满位声响信号时,应立即停止装料。
3. When loading, turn on the level indicator switch in the charging tank, and stop loading immediately when the level indicator sends out a full position sound signal.
4、装料完毕,应将装料口边缘上堆积的水泥清扫干净,盖好进料口盖,并把插销插好锁紧。
4. After loading, the cement accumulated on the edge of the loading port shall be cleaned, the feeding port cover shall be covered, and the bolt shall be inserted and locked.
5、卸料前,应将自上料搅拌车停放在平坦的卸料场地,装好卸料管,关闭卸料管蝶阀和卸压管球阀,打开二次风管并接通压缩空气,保证空气压缩机在无载情况下启动。
5. Before unloading, the self loading mixer shall be parked at a flat unloading site, the unloading pipe shall be installed, the butterfly valve and the ball valve of the unloading pipe shall be closed, the secondary air pipe shall be opened and the compressed air shall be connected to ensure that the air compressor can be started without load.
From five aspects, we can learn about several matters concerning the loading of the charging mixer truck. If you have any doubts or needs, please come to our website http://www.zkzsljbc.com Ask for advice!