小型搅拌车支承安全注意事项你知道包含哪些内容吗？接下来我们从八个方面解释一番，下面小编为您解答。

Do you know what the safety precautions for small mixer truck support include? Next, we will explain it from eight aspects. Here are some answers.

1、支承地上有必要是水平的。不然有必要做一个水平支承表面。不能支承在空穴上。

1. The supporting ground must be level. Otherwise, it is necessary to make a horizontal supporting surface. It cannot be supported on the cavity.

2、小型搅拌车有必要支承在坚实的地上上，若支腿大压力大于地上许用压力，有必要用支承板或辅佐方木来增大支承表面积。

2. It is necessary for a small mixer truck to be supported on a solid ground. If the large pressure of the outrigger is greater than the allowable pressure on the ground, it is necessary to increase the bearing surface area with a bearing plate or square timber.

3、小型搅拌车支承在坑、坡附近时，应保存满足的安全距离。

3. When the small mixer truck is supported near the pit and slope, the safety distance shall be kept.

4、支承时，须确保整机处于水平状况，整机前后左右水平大偏角不超越3度。

4. When supporting, ensure that the whole machine is horizontal, and the large horizontal deflection angle of the whole machine from front to back and from left to right does not exceed 3 degrees.

5、在打开或收拢支腿时，支腿旋转的范围内都是风险区域，人员在范围内有可能被夹伤。

5. When the outrigger is opened or closed, the scope of outrigger rotation is the risk area, and personnel may be pinched within the scope.

6、支承时，一切支腿有必要弹性和打开到规则的方位(支腿与支耳上箭头对齐，前支腿臂与前支腿伸出臂箭头对齐)不然有倾翻的风险。

6. When supporting, it is necessary for all outriggers to be flexible and open to a regular position (the outrigger is aligned with the arrow on the lug, and the front outrigger arm is aligned with the arrow of the front outrigger extension arm), otherwise there is a risk of tipping.

7、有必要按要求支撑好支腿才干操作臂架，有必要将臂架收拢放于臂架主支撑上后才干收支腿。

7. It is necessary to support the outrigger as required before operating the boom, and it is necessary to retract the boom and place it on the main support of the boom before the outrigger can be loaded and unloaded.

8、出现稳定性下降的要素有必要当即收拢臂架，排除后从头按要求支承，下降稳定性的要素包括雨、雪水或其它水源引起的地上条件改变支撑腿一侧地上下沉支腿油缸有泄漏。

8. In case of stability decline, it is necessary to immediately retract the boom and support it from the beginning as required after elimination. The factors of stability decline include changes in ground conditions caused by rain, snow or other water sources. The oil cylinder of the ground sinking outrigger on one side of the support leg has leakage.

以上便是小型搅拌车制成安全注意事项，希望对您有所帮助，如果还有问题可以来电我们公司http://www.zkzsljbc.com，与您洽谈。

The above are the safety precautions for making small mixer trucks. I hope it will be helpful to you. If you have any questions, you can call our company http://www.zkzsljbc.com , to negotiate with you.