Since the use of the mixing truck is gradually expanding, so the quality and use of the product has also put forward new requirements, but some users found that the current of the equipment is too large when starting, and then some places suffered damage, what to do?

　　检查自上料搅拌车各部件的完整性和清洁度，按照手册中的说明安装接线，确保接地装置的，不要乱接。

　　First check the integrity and cleanliness of the parts of the self-feeding mixer truck, install wiring according to the instructions in the manual, ensure the safety of the grounding device, do not misconnect.

　　自上料搅拌车运行前，检查防护罩是否松动。机器运转时不要对设备进行检修，以免沙子、石子等杂物落入或人为地抛入机器各运行部位，以免损坏机器设备，影响生产。

　　Check whether the protective cover is loose before the feeding mixer runs. Do not overhaul the equipment when the machine is running, so as to avoid sand, stones and other sundry objects falling or artificially thrown into the running parts of the machine, so as not to damage the machine and equipment, affecting production.

　　另外，振动筛使用完毕后，应及时将其取下收起或固定，以免人进入简清扫时触摸振动筛提起料斗，造成挤压事故。如需检修进料斗和倾卸斗下方的设备，只能在关闭机器并用螺栓支架固定料斗后进行。

　　In addition, after the use of the vibrating screen, it should be taken down or fixed in time, so as not to touch the vibrating screen hopper when entering the cleaning, resulting in extrusion accidents. Maintenance of the equipment under the feed hopper and dump hopper can only be carried out after shutting down the machine and securing the hopper with a bolt bracket.

　　在使用搅拌机的过程中，应该是重中之重，不要忽视任何小细节，以免发生不必要的事故。

　　In the process of using hydraulic mixer, safety should be the top priority, do not ignore any small details, so as to avoid unnecessary accidents.

　　自上料搅拌车运行时，在给料斗喂料前完全停止。使用前应检查离合器、制动器的灵活性，钢丝绳是否损坏及损坏程度，然后检查保护装置的完整性，然后进行调试。

　　When the feeder agitator is running, it stops completely before feeding the hopper. Before use should check the clutch, brake flexibility, wire rope damage and damage degree, and then check the integrity of the protection device, and then debug.

　　搅拌机轴端在高强度和高应力的工作下，使用寿命会大大降低，导致轴端漏浆。出现此问题的原因是浮动密封损坏，应更换新的浮动密封。此外，还应注意及时保养各零部件，及时更换密封件。

　　The service life of the shaft end of the mixer will be greatly reduced under high strength and high stress, resulting in slurry leakage at the shaft end. The cause of this problem is a damaged floating seal and a new floating seal should be replaced. In addition, attention should also be paid to the timely maintenance of all parts and replacement of seals in time.

　　当自上料搅拌车突然断电或超负荷无法工作时，需要清理滚筒的剩余物料，然后检查并修复其装载量。自上料搅拌车用户应进入搅拌筒进行清洁保养，并应控制电源，以防发生意外。

　　In case of sudden power failure or overload of the self-feeding agitator, it is necessary to clean the remaining material of the drum, and then check and repair its loading capacity. The user of the mixing truck should enter the mixing cylinder for cleaning and maintenance, and control the power supply to prevent accidents.

　　大家在操作自上料搅拌车的时候，会比较关注机器启动的时间段和机器结束工作的时间段，实际上其他时间段也要对该机器进行好好的维护才是。还有问题要了解的话，就来http://www.zkzsljbc.com网站咨询吧！

　　When we operate the feeding mixer, we will pay more attention to the time when the machine starts and the time when the machine ends work. In fact, other time periods should also be well maintained for the machine. If you still have questions to ask, go to http://www.zkzsljbc.com!