1. If the painted surface of 3.0 m3 automatic feeding mixer is not used for care, the metal coating will produce very small cracks and continue to penetrate the coating until it penetrates the whole coating. If the cracks contain wax, stripes will appear on the body. Regular waxing will gradually reduce cracks.

2.当暴露在阳光下的紫外线时，3.0方自动上料搅拌车会蒸发并保护空气中的油，随着时间的推移，油漆会过度分散。涂料表面的亮度和深度大大降低，涂料表面逐渐变白，形成氧化层，缩短涂料寿命。如果3.0方自动上料搅拌车的油漆表面被严重氧化，可以通过研磨和抛光加工。

2. When exposed to ultraviolet rays in the sun, the 3.0m3 automatic feeding mixer will evaporate and protect the oil in the air. Over time, the paint will be excessively dispersed. The brightness and depth of the coating surface are greatly reduced, the coating surface gradually turns white, forms an oxide layer, and shortens the service life of the coating. If the paint surface of 3.0 m3 automatic feeding mixer is seriously oxidized, it can be processed by grinding and polishing.

3.由于3.0方自动上料搅拌车而发生表面磨损。昆虫，鸟粪，树液，焦油和沥青可能是原因。一些小的蚀刻可以通过研磨和抛光来。

3. Surface wear due to 3.0m3 automatic feeding mixer. Insects, bird droppings, tree sap, tar and asphalt may be the cause. Some small etching can be solved by grinding and polishing.

除了上述方法之外，为了有效地防止油漆飞溅在车辆上，在驾驶车辆时必须注意驾驶并避免碰撞和摩擦。否则，将发生其他损坏

In addition to the above methods, in order to effectively prevent paint splashing on the vehicle, you must pay attention to driving and avoid collision and friction when driving the vehicle. Otherwise, other damage will occur

选择3.0方自动上料搅拌车的注意事项

Precautions for selecting 3.0 m3 automatic feeding mixer

1.油箱容量选择：3.0方自动上料搅拌车在购买时需要注意小巧方便的外观。当然，您需要根据需要购买，并且有10,12和14个派对。确定音量。

1. Selection of oil tank capacity: 3.0m3 automatic feeding mixer needs to pay attention to its compact and convenient appearance when purchasing. Of course, you need to buy as needed, and there are 10, 12 and 14 parties. Determine the volume.

2.判断3.0方自动上料搅拌车罐体的质量：罐体的质量主要是指罐体的厚度。目前一般5mm厚的锰板，业主可以向厂家询问罐体厚度，如果厚度小于5mm，则不需要考虑。

2. Judge the quality of the tank of the 3.0m3 automatic feeding mixer truck: the quality of the tank mainly refers to the thickness of the tank. At present, the owner can ask the manufacturer about the thickness of the tank for the manganese plate with a thickness of 5mm. If the thickness is less than 5mm, it does not need to be considered.

3.根据运行良好的道路状况：购买3.0方自动上料搅拌车时，需要根据使用情况设置基座。如果跑道非常平坦，通常是道路。性能。

3. According to the road conditions in good operation: when purchasing the 3.0m3 automatic feeding mixer, the base shall be set according to the use conditions. If the runway is very flat, it is usually a road. Performance.

3.0方自动上料搅拌车在选择时需要遵循正确的标准，了解制造商的生产规则并能够购买正确的车辆。在选择设备的过程中，我们希望您能够根据以上知识做出合理的选择。

3.0 Party A's automatic loading mixer shall follow the correct standards when selecting, understand the manufacturer's production rules and be able to purchase the correct vehicles. In the process of selecting equipment, we hope you can make a reasonable choice based on the above knowledge.

以上的精彩内容来自：莱州中科聚峰机械有限公司自动上料搅拌车产品的介绍及分享，更多内容请继续关注我们：http://www.zkzsljbc.com

The above wonderful content comes from the introduction and sharing of automatic feeding mixer products of Laizhou Zhongke Jufeng Machinery Co., Ltd. please continue to pay attention to us for more content: http://www.zkzsljbc.com