1、正确把握全自动搅拌车变速箱的油的使用周期，定期更换。

1. Correctly grasp the service cycle of the oil in the gearbox of the automatic mixer truck and replace it regularly.

一般多数厂家会建议变速箱换油周期通常为两年或4~6万。车主朋友们在使用车辆时要保持变速箱油清洁，因为变速箱油运用时间长了以后会发生油垢，有可能会构成油泥，会加大各摩擦片和各部件的磨损，还会使各阀体中阀体的移动不畅，油压操控受影响，从而使全自动搅拌车变速箱出现异常。

Generally, most manufacturers will recommend that the oil change interval of transmission is usually two years or 40000~60000 kilometers. Owners and friends should keep the gearbox oil clean when using the vehicle, because the gearbox oil will produce oil dirt after being used for a long time, which may form oil sludge, increase the wear of various friction plates and components, and also make the movement of valve bodies in each valve body not smooth, and the oil pressure control is affected, thus making the gearbox of the automatic mixer abnormal.

2、经常查看变速箱油液位是不是正常。

2. Always check whether the transmission oil level is normal.

查看变速箱油液需要将油预热到50℃左右，再将挡位杆在各挡位逗留2秒钟后置于泊车挡，此刻油尺正常油面应坐落高与低线之间，如未达到，应及时增加一样质量的油品。

To check the transmission oil, it is necessary to preheat the oil to about 50 ℃, and then put the gear lever in each gear for 2 seconds, and then put it in the parking gear. At this moment, the normal oil level of the dipstick should be between the high and low lines. If it is not reached, the same quality oil should be added in time.

3、正确更换变速箱油。

3. Change the transmission oil correctly.

动态换油是目前比较提倡的换油方法，选用专用的变速箱清洁设备，在变速箱工作的过程中，将旧油充沛循环，排放洁净后再参加新的变速箱油，从而使换油率高达90以上，确保高能效换油。

Dynamic oil change is a relatively recommended oil change method at present. Special gear box cleaning equipment is selected. During the operation of the gear box, the old oil is fully circulated, and then the new gear box oil is added after the discharge is clean, so that the oil change rate can reach more than 90, and the high-efficient oil change can be ensured.

4、不要随便拆卸变速箱。

4. Do not disassemble the transmission randomly.

变速箱在装配的时候，是厂家经过精密调配的，包括每一个螺丝的位置和松紧度都是有技术参数的，如果我们手工拆卸以后，很难装回原来的位置，这势必会加重变速箱额磨损。需要维修变速箱一定要到底盘厂家的维修服务站中，由专门的维修人员进行操作。

When assembling the gearbox, the manufacturer has carefully adjusted it, including the position and tightness of each screw with technical parameters. If we disassemble it manually, it is difficult to install it back to its original position, which will inevitably aggravate the wear of the gearbox. The gearbox must be repaired at the maintenance service station of the chassis manufacturer and operated by special maintenance personnel.

全自动搅拌车变速箱的4个养护方法相关内容就讲解到这里了，您对此有怎样的疑惑或者需求，就来我们网站http://www.zkzsljbc.com咨询吧！

The relevant contents of the four maintenance methods for the gearbox of the automatic mixer are explained here. If you have any doubts or needs about this, please come to our website http://www.zkzsljbc.com Ask!