Oxidation of paint surface

在太阳紫外线的强烈照射下，小型搅拌车的车膜会不断蒸发油分来保护自身，时间久了会导致漆面油分过度散失，在空气中形成氧化层，影响漆面的亮度和光泽度。此时可明显观察到车漆发乌、发白、缺少光泽等现象，如果比较严重，可以通过研磨和抛光的方法进行处理。

Under the strong ultraviolet radiation of the sun, the film of the small mixer will continue to evaporate oil to protect itself. After a long time, it will cause excessive loss of paint oil, form an oxide layer in the air, and affect the brightness and gloss of the paint. At this time, it can be observed that the car paint is black, white and lack of luster. If it is serious, it can be treated by grinding and polishing.

二交通膜

Two traffic membranes

搅拌车在工作过程中容易因为摩擦产生静电，吸附大量的灰尘和油污。长期会在表面形成一层坚固的“交通膜”，导致漆面被氧化腐蚀，对车辆进行研磨抛光可以有效这种情况。

Mixing truck is easy to generate static electricity due to friction in the process of working, which can absorb a lot of dust and oil. A strong "traffic film" will be formed on the surface for a long time, which will lead to the oxidation and corrosion of the paint surface. Grinding and polishing of vehicles can effectively solve this problem.

三龟裂

Three cracks

有些车主常常忽视漆面护理，搅拌车的工作环境比较特殊，金属漆可能产生一些细微的裂痕，它会不断地向下渗透，严重时会穿透整个色漆层。重喷漆的质量不好也可能产生这种问题。如果车主发现车身有龟裂的现象，建议经常打蜡，做好护理。

Some car owners often ignore the paint care. The working environment of the mixer is special. The metal paint may have some tiny cracks, which will continue to penetrate downward. In serious cases, it will penetrate the whole paint layer. Poor quality of repainting can also cause this problem. If the car owner finds that the car body is cracked, it is recommended to wax it regularly and take good care of it.

四褪色

Four color fading

空气中的污染是导致车漆褪色的主要原因。褪色与氧化的区别在于，车漆褪色会在车身形成不均匀的色差。如果程度较轻，可进行简单的研磨、抛光处理；如果褪色严重，必须重新喷漆。

Pollution in the air is the main cause of paint discoloration. The difference between discoloration and oxidation is that discoloration of car paint will cause uneven color difference in the car body. If the degree is light, simple grinding and polishing can be carried out; If the discoloration is serious, it must be repainted.

五车身痕迹

V. body marks

鸟粪、焦油等引起的轻微蚀痕可研磨抛光处理；氧化、长期使用化学剂形成的水痕可通过打蜡抛光进行处理，严重时需要重新喷漆；因摩擦导致的细微划痕一般采用的抛光方法去除。

Slight erosion marks caused by bird manure, tar, etc. can be ground and polished; The water mark formed by oxidation and long-term use of chemical agent can be treated by waxing and polishing, and it needs to be repainted when it is serious; Fine scratches caused by friction are usually removed by professional polishing methods.

今天的小型搅拌车精彩内容就给大家分享到这了，更多的精彩内容请点击我们的网站http://www.zkzsljbc.com进行关注留言，后续会有更多的精彩内容为您呈现.

Today's small mixer wonderful content to share with you, more wonderful content please click on our website http://www.zkzsljbc.com Follow the message, there will be more wonderful content for you