自动上料搅拌机基本结构主要包括取器、搅拌筒前后支架、减速机、液压系统、搅拌筒、操纵机构、清洗系统等。其工作原理：通过取装置将汽车底盘的动取出，并驱动液压系统的变量泵，把机械能转化为液压能传给定量马达，马达再驱动减速机，由减速机驱动搅拌装置，对混凝土进行搅拌。
The basic structure of automatic feeding mixer mainly includes extractor, front and rear supports of mixing drum, reducer, hydraulic system, mixing drum, operating mechanism, cleaning system, etc. Its working principle: take out the chassis of the car through the take out device, drive the variable pump of the hydraulic system, transfer the mechanical energy into hydraulic energy to the quantitative motor, the motor drives the reducer, and the reducer drives the mixing device to mix the concrete.
效率生产、生产一直各大企业比较重视的问题，在使用时节油的问题也受到部分客户的关注，小编来给大家分享一些省油的小技巧：
Efficient production and energy-saving production have always been the problems that major enterprises attach great importance to, and the problem of oil in use has also been the focus of some customers
一、车辆起步
1、 Vehicle start
车辆在起步时，可以大油门，充分发挥发动机的性能，让搅拌车以快的时间达到巡航车速，这样驾驶可以达到节油的目的。
At the beginning of the vehicle, you can throttle, give full play to the performance of the engine, so that the mixer can reach the cruising speed in a fast time, so that driving can achieve the purpose of fuel saving.

二、平路行驶
2、 Driving on a level road
1、平路行驶时，尽量在一条车道上行驶，减少来回变换车道的情况发生，有利于节油。
1. When driving on a flat road, try to drive in one lane to reduce the occurrence of lane changing back and forth, which is conducive to fuel saving.
2、如果与其他车辆结伴而行，切勿采用跟车的方式，可以各自行驶，约定好相聚点。往往在后面跟车的车辆油耗会高于前车。
2. If you travel with other vehicles, do not follow them. You can drive separately and make a meeting point. Often, the fuel consumption of the car following will be higher than that of the car in front.
自动上料搅拌机
Automatic feeding mixer
3、控制好发动机转速，不同发动机，控制转速不一致。
3. Control engine speed, different engine, control speed is not consistent.
4、在平路行驶时，尽量保持油门开度的稳定，油门在30左右即可，切忌油门忽高忽低。
4. When driving on a level road, try to keep the opening of the throttle stable. The throttle can be around 30. Avoid high and low throttle.
三、车辆爬坡
3、 Vehicle climbing
1、搅拌车在爬坡的时候，坚持小坡冲，大坡稳的原则。
1. Mixing truck in climbing, adhere to the principle of small slope, big slope stability.
2、坡度小路段的时候可以采用冲坡的方式，车辆提前加速，让车辆具有足够的惯性行驶到坡顶。
2. When the slope is small, we can use the way of slope, the vehicle accelerates in advance, so that the vehicle has enough inertia to drive to the top of the slope.
4、在车辆即将到达坡顶时，如果前方是下坡，可以减小油门开度，利用车辆的惯性到达坡顶，切勿在即将到达坡顶时增挡，这时完全可以利用下坡的惯性进行增速，减少不必要的燃油消耗。
4. When the vehicle is about to reach the top of the slope, if the front is downhill, you can reduce the throttle opening and use the inertia of the vehicle to reach the top of the slope. Do not increase the gear when you are about to reach the top of the slope. At this time, you can use the inertia of the downhill to increase the speed and reduce unnecessary fuel consumption.
有了自上料搅拌车上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站：http://www.zkzsljbc.com或者来电咨询，我们会尽全力为您
With the summary of self feeding mixer, I hope it can be helpful to our customers. If there is anything you don't understand or ask for help, please click our website: http://www.zkzsljbc.com Or call consultation, we will try our best to solve for you