为了确保施工质量，提高小型搅拌车的工作效率，在搅拌车开动前就需把准备工作做好，究竟需做好哪些准备工作？接下来小编就给大家论述一下。

In order to ensure the construction quality and improve the work efficiency of the small mixer, the preparations should be done before the mixer starts. What preparations should be done? Next, Xiaobian will discuss it for you.

1、把施工现场清理干净，不能有矸石及杂物出现;

1. Clean up the construction site without gangue and sundries;

2、将搅拌车安放稳当，接好风、水管路、输料管，各管路排布要平直，不得有急弯，接头要严密，不得漏风;

2. Place the mixer truck firmly, connect the air, water and material pipes, and the arrangement of each pipeline should be straight without sharp bends, and the joints should be tight without air leakage;

3、检查搅拌车性能是否完好，各紧固件固定是否牢固，然后接通电源空载试运转，检查转动是否正常;

3. Check whether the performance of the mixer truck is intact and whether the fasteners are fixed firmly, and then turn on the power for no-load test run to check whether the rotation is normal;

4、在施工面周边设置施工范围，在施工区域安设厚度标志;

4. Set up the construction range around the construction surface, and set up thickness signs in the construction area;

5、为搅拌车操作人员准备好劳保用品，施工过程中有哪些注意事项需提前交代好;

5. Prepare labor protection supplies for the mixer truck operators, and what precautions should be explained in advance during the construction process;

6、在施工范围周边拉上隔离带，无关人员不得入内，确保施工后施工面不被破坏。

6. Set up isolation belt around the construction scope, and irrelevant personnel are not allowed to enter, so as to ensure that the construction surface is not damaged after construction.

此外大家在工作了一段时间之后，都会去选择个地方度假。搅拌车作为当前常用的一款施工设备，在经历了多次的施工后，它也是需要做保养的。经过养护的搅拌车，不仅能帮助提高施工效率，缩短施工周期，还能大大减少施工的人工成本，为了更加符合各类型隧道施工的实际工况，一直致力为客户打造更好的机械产品。

In addition, after working for a period of time, everyone will choose a place for vacation. As a commonly used construction equipment, the mixer truck also needs maintenance after many times of construction. The cured mixer truck can not only help improve the construction efficiency and shorten the construction cycle, but also greatly reduce the labor cost of construction. In order to better meet the actual working conditions of various types of tunnel construction, it has been committed to creating better mechanical products for customers.

无论是生产企业还是使用者，普遍缺少防锈意识，更不要说掌握正确的防锈方法。搅拌车一般摆放在厂房空地上或者工地上，直接暴露在恶劣环境中，风吹日晒，雨露侵蚀，搅拌车内外部很快就会出现各种锈蚀。针对这种情况，要对搅拌车进行杂质，涂抹防锈由之后，利用防锈包装纸或包装膜进行缠绕包装。

Both manufacturers and users generally lack the awareness of rust prevention, let alone master the correct rust prevention methods. The mixer truck is generally placed on the open space of the plant or on the construction site, which is directly exposed to the harsh environment, wind and sun, rain and dew erosion, and all kinds of rust will appear inside and outside the mixer truck soon. In view of this situation, it is necessary to remove impurities from the mixer truck, apply anti rust coating, and then wrap it with anti rust packaging paper or packaging film.

其次就是小型搅拌车出厂后需要运到全国各地销售，而这个运输过程也是容易锈蚀的环节。所以搅拌车在运输过程中要采取适合的防锈包装措施，就显得尤为重要了。使用一种针对大型工程机械的包装专门开发的包装膜，柔韧性和密闭性非常好，遇热以后会发生收缩，使包装更加紧密，具有防水、防尘、防锈、防碰等功能，更重要的是成本较低，非常适合搅拌车的包装。

The second is that small mixer trucks need to be transported to all parts of the country for sale after leaving the factory, and this transportation process is also a link that is easy to rust. Therefore, it is particularly important to take appropriate anti rust packaging measures during the transportation of mixer truck. A specially developed packaging film for the packaging of large-scale construction machinery is used, which has very good flexibility and tightness. It will shrink in case of heat, making the packaging more compact. It has the functions of waterproof, dustproof, rust proof, anti-collision and so on. More importantly, it has low cost, and is very suitable for the packaging of mixer trucks.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站http://www.zkzsljbc.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.zkzsljbc.com And consult our staff, will serve you wholeheartedly.