卸载时间参数是不可能的
The unload time parameter is not possible
方自上料搅拌车无法控制料仓中的水平仪，因此行业基本上可以控制时间。设置时间参数，加载和卸载时间设置实际上非常容易。合理的是在使用前稍等片刻，慢慢增加到每个抽吸位置，并在物料水平达到抽吸时间时减去1秒。排出时间是为了确保物料再次排出。
Square self feeding mixer can not control the level in the silo, so the industry can basically control the time. Setting time parameters, loading and unloading time settings are actually very easy. It is reasonable to wait a moment before use, slowly increase to each suction position, and subtract 1 second when the material level reaches the suction time. The discharge time is to ensure that the material is discharged again.
方自上料搅拌车输入端口的输入量是否合适？
Is the input quantity at the input port of the self feeding mixer suitable?
我们的许多项目都使用手动喷枪吸取材料。为了方便将物料枪直接插入物料桶或吨袋中，物料枪的吸入口被紧密的材料压缩，强大的负压将理想的物料拉走。6方自上料搅拌车的破坏力很强，很容易堵塞管道。正确的方法是使物料在进气口和空气之间形成特定的气液混合比，并随着气流的推动而均匀地流向进料器。如果原料的积压时间太长，可能会非常困难。此时，喷枪需要一个振荡器来摧毁冷凝的材料。

Many of our projects use manual spray guns to draw materials. In order to insert the material gun directly into the material barrel or ton bag, the suction port of the material gun is compressed by the tight material, and the ideal material is pulled away by the strong negative pressure. The destructive power of 6-square self loading mixer is very strong, and it is easy to block the pipeline. The correct way is to make the material form a specific gas-liquid mixing ratio between the air inlet and the air, and flow evenly to the feeder with the push of the air flow. If the backlog of raw materials is too long, it may be very difficult. At this point, the gun needs an oscillator to destroy the condensed material.
本文的精彩内容由自动上料搅拌车提供的精彩内容分享，更多的精彩内容请点击进入我们的网站：http://www.zkzsljbc.com，我们会有更多的精彩内容等您查看，欢迎大家来电咨询.
The wonderful content of this article is shared by the wonderful content provided by the automatic feeding mixer. For more wonderful content, please click to enter our website: http://www.zkzsljbc.com , we will have more wonderful content waiting for you to check, welcome to inquire